Speaker, Audio out, Operating instructions – Sony WEGA KV-32FS12 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
MTS
Stereo:
Select when viewing a broadcast in stereo.
Multi-Channel
Mono:
Select to reduce noise in areas of poor reception.
sound
Auto-SAP:
Select to have the TV automatically switch to a
Second Audio Program (SAP) when a signal is received.
^ If your TV is set to Auto-SAP, some programs may be muted or distorted. If
your TV does not output sound, change your Audio settings to Stereo or
Mono.
^ Press for direct MTS settings (Stereo, Mono, Auto-SAP).
ON:
Select to listen to the sound from the TV speakers with
or without a separate stereo system.
OFF:
Select to turn off the TV speakers and listen to the
TV's sound only through external audio system speakers.
Variable:
Adjust the volume through your TV.
Fixed:
Adjust the TV volume through a connected stereo.
Speaker
Custom selection
of audio output
source
Audio Out
Use to control the
TV's volume
through a stereo
^
Audio out can only be set when Speaker is set to OFF
24