Tv, satellite receiver, and vcr – Sony WEGA KV-32FS12 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
TV, Satellite Receiver, and VCR
Satellite
antenna
cable
Satellite receiver
VCR
From
cable/
antenna
AUOll R mlllOL llOEO
2
LINE IN
LINE OUT
é)® ®
VHFiUHF
[|)0UT
Rear of TV
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable or antenna to the
IN jack on your VCR.
3
Using a coaxial cable, connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4
Using A/V cables, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using A/V cables, connect AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV.
^
To view from the satellite receiver or VCR, select the video input to which
your satellite receiver or VCR is connected by pressing on the remote
control.
10