If you press a wrong button in step 3 – Sony RM-V15 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ENTER

4 Press and release the

ENTER button to store the

code number in the
Commander's memory.

To finish setting up the component, go

to "Step 1; Entering the Code Number"
on page 9 in step 2 to 6 and complete
the procedures that are described.

If you press a wrong button in

step 3
Press and release the S (Set) button.
Then enter the correct code number
and press and release the ENTER '
button.

Searching for the Correct

Code

If you've tried all the code numbers
listed for your component and you still
cannot get the Commander to work, try
these steps:

Using the component's original

remote control (or the power switch
on the component itself), power
on/off the component.
Turn the power of the TV or cable
box on and the VCR off.