Sony MDS-M100 User Manual
Minidisc deck
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- MiniDisc Deck
- WARNING
- Welcome!
- About This Manual
- Getting
- Started
- Location and Function of Parts
- Recording on MDs
- Notes on Recording
- Recording on an MD
- Automatic conversion of digital sampling rates during recording
- Automatic de-emphasizing of input signals for digital recording
- Guide to the Serial Copy Management System
- I/Ò
- Turn on the amplifier and program source, and select the source on the amplifier.
- 5 Press MENU/NO twice.
- 6 Turn AMS (or press repeatedly) until
- 7 Turn AMS (or press /►>! repeatedly) to select the recording mode, then press AMS or YES.
- 8 Press MENU/NO.
- 9 If necessary, locate the point on the MD to start recording from.
- To record over from the beginning of an existing MD track
- To record over from the middle of an MD track
- 11 If you have set INPUT to ANALOG in step 4 above, adjust the recording level.
- 12 Press O or II.
- 13 Start playing the program source.
- Recording Tips
- Marking Track Numbers While Recording (Track Marking)
- Press • REC at the point where you want to add a track number while recording.
- 1 While the deck is stopped, press MENU/NO twice.
- 2 Turn AMS (or press K4/^H repeatedly) until "T.Mark" appears, then press AMS or YES.
- 3 Turn AMS (or press /►» repeatedly) to select the setting, then press"AMS or YES.
- Press MENU/NO.
- Marking Track Numbers While Recording (TVack Marking)
- Starting Recording With Six Seconds of Prestored Audio
- Synchro-recording With the Audio Component of Your
- Synchro-recording With a Sony CD Player
- Playing MDs
- Playing an MD
- Playing a Specific Track
- Locating a Particular Point in a Track
- Playing Tracks Repeatedly
- Playing Tracks in Random Order (Shuffle Play)
- Creating Your Own Program (Program Play)
- Tips for Recording From MDs to Tape
- Editing
- Recorded MDs
- Brief descriptions of buttons and controi used to edit MDs
- Erasing Tracks
- 1 While the deck is stopped, playing, or paused, press MENU/NO.
- 2 Turn AMS (or press repeatedly) until "Tr
- 3 Turn AMS (or press repeatedly) until the
- 4 Press AMS or YES.
- Erasing Tracks
- m
- 1 While the deck is stopped, playing, or paused, press MENU/NO.
- 2 Turn AMS (or press /►►! repeatedly) until "All Erase ?" appears, then press AMS or YES.
- 3 Press AMS or YES.
- To cancel the operation
- Example: Erasing portion "B2" of the second track
- Q]AAA
- [TJAAA
- While the deck is stopped, playing, or paused, press MENU/NO.
- 6 Press AMS or YES to enter point A.
- 8 Repeat step 4 until you've located point B.
- 9 Press AMS or YES to enter point B.
- To cancel the operation
- Dividing Tracks
- 1 While the deck is stopped, playing, or paused, press MENU/NO.
- 2 Turn AMS (or press l◄◄/►►^ repeatedly) until "Divide ?" appears, then press AMS or YES.
- 4 While monitoring the sound, turn AMS (or press
- 5 Repeat step 4 until you've located the dividing point.
- 6 Press AMS or YES.
- 1 while the deck is playing, press AMS at the point you want to divide the track.
- 3 Press YES.
- Combining Tracks
- Moving Tracks
- 3
- □ AAA
- 1 While the deck is stopped, playing, or paused, press MENU/NO.
- 2 Turn AMS (or press («/►►I repeatedly) until "Combine ?" appears, then press AMS or YES.
- □ AAA
- 1 While the deck is stopped, playing, or paused, press MENU/NO.
- 2 Turn AMS (or press repeatedly) until
- 4 Turn AMS (or press repeatedly) until the
- 3
- Naming a Track or MD
- 2 Turn AMS until "Name ?" appears, then press AMS or YES.
- 3 Turn AMS until "Nm In ?" appears, then press AMS or YES.
- 5 Press AMS or YES again.
- 6 Press LEVEL/DISPLAY/CHAR repeatedly to select the character type.
- a
- a
- a
- Naming a Track or MD
- a
- a
- 8 Press AMS.
- 9 Repeat steps 6 to 8 to enter the rest of the name. To change a character
- To erase a character
- 10 Press YES.
- 2 Press CHAR repeatedly to select the character type.
- 3 Enter a character.
- 4 Repeat steps 2 and 3 to enter the rest of the name. To change a character
- 5 Press NAME.
- 1 While the deck is stopped, playing, or paused, press MENU/NO.
- 2 Turn AMS (or press repeatedly) until
- 3 Turn AMS (or press «◄/►►I repeatedly) until "Nm Copy ?" appears, then press AMS or YES.
- Undoing the Last Edit
- Functions
- Additional
- Information