Sony MDS-M100 - Manual (Page 36)

Undoing the Last Edit
You can undo the last edit operation and restore the
contents of the MD to the condition that existed before the
operation. Note, however, that you can't undo an edit
operation if you perform any of the following operations
after the edit:
• Press • REC on the deck
• Press # or MUSIC SYNC on the remote
• Turn off the deck or eject the MD
• Disconnect the AC power cord.
4
Press AMS or YES.
"Complete!!" appears for a few seconds and the MD is
restored to the condition that existed before the edit
operation.
To cancel the operation
Press MENU/NO or«.
MENU/NO AMS YES
a . ,1............................. ..
i LJ
6 ““1 '
JIM l) “
^^
^
m
a
3
to
X
e
a.
(0
a.
3
o
1
While the deck is stopped and no track number
appears in the display, press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press repeatedly) until
"Undo ?" appears.
"Undo ?" doesn't appear if no editing has been done.
3 Press AMS or YES.
One of the following messages appears depending on
the last edit operation.
Last edit operation Message
Erasing a track
Erasing all the tracks on an MD Erase Undo?
Erasing a portion of a track
Dividing a track Divide Undo?
Combining tracks CombineUndo?
Moving a track Move Undo?
Naming a track or MD
Copying a track or disc name
Renaming a track or MD
Erasing a track or disc name
Erasing all the names on the MD
Name Undo?
36