Warning indicators – Sony CCD-TR916 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/631144/70/background.png)
Warning indicators
The warning indicators and the recording lamp flash to inform you of the following
situation. The illustrations below are the warning indicators of the viewfinder. The
same indicators flash also in the display window.
T: You can hear the beep sound when BEEP is set to ON.
[T] The battery is weak or dead.
Slow flashing: The baftery is weak.
Fast flashing: The battery is dead.
[2] The tape is near the end.
[3] The tape has run out.
[4] No tape has been inserted.
[5] The tab on the tape is out (red), (p. 9)
[6] Moisture condensation has occurred,
(p. 51)
^ indicator appears only when the cassette
is inserted.
0
The video heads may be
contaminated, (p. 52)
[8] Some other trouble has occurred.
Disconnect the power source and contact
your Sony dealer or local authorized
facility.
[9] The lithium battery is weak or is not
installed, (p. 44)
This indicator flashes just only after
powering on.
70