Cause and/or corrective actions – Sony CCD-TR916 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
jtom
Cause and/or Corrective Actions
ate or time indicator is flashing. • The lithium battery is weak or dead.
■> Replace the lithium battery with a new one. (p. 45)
• You pressed DATE and TIME together for more than 2
seconds. The camcorder is not malfunctioning.
ate or time indicator
pears.
• Reset the date and time. (p. 46)
teadyShot function does not
• STEADY SHOT is set to OFF.
itc. (CCD-TR96/TR916 only)
-» Set STEADY SHOT to ON. (p. 42)
• The SteadyShot function does not work when the wide
mode is set to 16:9FULL.
utofocusing function does not
• FOCUS is set to MANUAL.
Set it to AUTO (p. 32)
• Shooting conditions are not suitable for autofocus.
-> Set FOCUS to MANUAL to focus manually, (p. 32)
ding stops in a few seconds.
• START/STOP MODE switch is set to or 5 SEC.
■¥ Set it to A ■ (p. 26)
tie display position shifts.
• There are unwanted blanks before or after the title.
■> Delete them then select J.
ider function does not work.
• The START/STOP MODE switch is set to 5 SEC or A .
Set it to A . (p. 26)
uilt-in light turns off while in
• LIGHT is set to AUTO.
•4 Set it to ON. (p. 36)
uilt-in light turns on and off
• LIGHT is set to AUTO.
tedly.
■> Set it to ON. (p. 36)
uilt-in light does not turn on
• Bulb is dead.
LIGHT is set to ON.
Replace the bulb. (p. 37)
Continued to the next page
57