Diting onto another tape, To edit more scenes, To stop editing – Sony CCD-TR916 User Manual
Page 43: Editing onto another tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
diting onto another tape
You can create your own video program by editing with any other B 8 rrun, HiH Hi8,
SE VHS, SSK S-VHS, SKS VHSC, SSHSH S-VHSC, ra Betamax or BSlBitel ED Batamax
VCR that has video/audio inputs.
After connecting the camcorder to the VCR,
(1) Set the POWER switch to PLAYER.
(2)
Insert a blank tape (or a tape you want to record over) into the VCR and insert
your recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then press II to put the camcorder in playback pause
mode.
(4) On the VCR, locate the recording start point and put the VCR in recording
pause mode.
(5) Press I I on the camcorder and VCR simultaneously to start editing.
m
Q.
O
: Signal flow
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press ■ STOP on both the camcorder and VCR.
43