If the battery becomes weak during a call, Redialing, To erase the last phone number dialed – Sony SPP-A957 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the battery becomes weak during a call
The handset will beep every three seconds with the TALK/BATT
LOW lamp flashing at the same time. Finish your call and charge the
battery pack.
For optimum performance, charge the battery for a full 12 hours.
Note that during the first 10-15 minutes of charging, the phone will
be inactive, i.e., unable to make or receive a call.
After this initial 10-15 minutes, you
may
be able to use the phone, but
the battery duration will be
very short;
thus it is recommended that
you
fully charge
the battery before next use.
Redialing
1
Press
(TALK),
and wait until the TALK/BATT LOW lamp
lights up.
The IN USE lamp on the base unit lights up.
2
Press (
REDIAL/PAUSE
) to redial the number last dialed.
Note
if the number exceeds 32 digits or if it is erased, five short error beeps will alert
you that the number cannot be dialed.
To erase the last phone number dialed
Press
(
REDIAL/PAUSE
) twice.
The number will be erased from the memory, and you will hear a long
confirmation beep.
Basics