Preparing the battery pack, Step3 – Sony SPP-A957 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Step3

Preparing the battery pack

Charge the battery pack for more than

12 hours

before you start using

your phone.

1 Slide open the battery

compartment lid of the handset.

Connect the battery connector

with correct polarity (black wire
goes on right side and red wire
goes on left).

Hook the cords, and insert the

battery pack. Then close the lid.

Place the handset on the base

unit.

You can place either side facing

up.

The CHARGE lamp lights up

when the handset is properly
seated on the charge terminals

of the baseunit. Charge the
battery pack for more than

hours

so that the battery is fully

charged. The CHARGE lamp
remains lit even after charging

is completed.

CHARGE lamp

continued

Getting Started