Choose the dialing mode, If you aren't sure of your dialing system, Step 2: setting up the base unit (continued) – Sony SPP-A957 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 2: Setting up the base unit (continued)

Notes

• Use only the supplied AC-T46 AC power adaptor.

Do not use any other AC power adaptor.

• Connect the AC power adaptor to a continuous power

supply.

• Place the base unit close to the AC outlet so that you

can unplug the AC power adaptor easily.

Polarity of the plug

Tips

• If your telephone outlet is not modular, contact your

telephone service company for assistance,

• To remove the wall bracket, press the upper tab.

Modular

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode

{tone or pulse).

Depending on your dialing system, set the DIAL MODE switch as

follows:

If your dialing system is

Set the switch to

Tone

Pulse

If you aren't sure of your dialing system

Make a trial call with the DIAL MODE switch set to T.

If the call connects, leave the switch as is; otherwise, set to P.

Getting Started