Sony SPP-71 - Manual (Page 10)

Identifying the
parts □
Base unit
|T1 Charging terminals
[U PAGE button (SPP-73 only)
Hj CHARGE lamp
[U LINE lamp
[U POWER lamp
Antenna
[ tj dial mode switch
[8j DC IN 9V jack
@ TEL LINE jack
Handset
[hi TALK button
[Hi
TONE(*) button'
il^ CHANNEL button
[H SPEED DIAL/PROGRAM button
(SPP-72/73 only)
MUTE button (SPP-71 only)
H3 RING ON/BATT SAVE switch
HH TALK/BATT LOW lamp
(T^ Dialing keys
[T^ Battery compartment
Hi FLASH button
M REDIAL/PAUSE button
Charging terminals
Supplied accessories
AC power adaptor (AC-T48/T48A) (l)_aj
Rechargeable battery pack (BP-T16) (l)/b]
Telephone line cord (short 1, long 1)| c
Directory (2)
Connecting the base
unit B_________________
1
Connect one end of the AC
power adaptor (supplied) into
the DC IN 9V jack, and the other
end into an AC outlet.
To avoid accidental disconnection, be
sure to pass the AC power adaptor
cord around the hook as shown in the
illustration,
2
Plug one end of the telephone
line cord (supplied) into the TEL
LINE jack, and the other end into
a telephone outlet.
3
Fully extend the antenna.
Make sure it points toward the ceiling.
Notes on connecting
• Use only the AC power adaptor supplied.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a
continuous power supply.
• If your phone jack is not modular, contact
your telephone service company for
assistance.
■ To hang the base unit on a wall
Q
Choose an appropriate wall surface that
can support the total weight of the base
unit and the handset. ,
Attach the hanger-piece upside down.
Choosing tone or
pulse dialing
E_______
For the telephone to work correctly, you
must .set it to the type of your dialing
system: tone or pulse dialing.
Set the DIAL MODE switch to:
"T" (Tone) if your dialing system is
tone.
"P" (Pulse) if your dialing system
is pulse.