Sony ICF-CD2000 - Manual (Page 9)

Setting the Clock
When the batteries are first installed, "AM 12:00"
flashes and "LOCAL" appears in the display.
The clock is on the 12-hour system.
Setting the LOCAL Time
1 Press WORLD/LOCAL to display
"LOCAL".
2 Hold down CLOCK until you hear a
beep.
"LOCAL"and the hour flashes.
d I LJ.
-I-LOCAL AM-/Alfieri
' ' ^iL 'tìU
/ I I \
Press TUNeSCAN TIME SET + or - to
set the hour.
Press + to advance and - to go back. Hold
down the button to change the time
continuously.
Press CLOCK to enter the hour.
A beep sounds and the minute flashes.
LOCAI —
k| I |NK
-J-U,
n -
^•U U -
/ I I I \
5 Press TUNE/SCAN TIME SET -i- or - to
set the minute^ and then press CLOCK.
Two beeps sound to confirm the setting. The
clock starts to operate and flashes.
Setting the WORLD Time
The WOLRD time displays the time for a
selected time area in the world.
1 Press WORLD/LOCAL to display
"WORLD".
"TIME DIFF" and the time difference to your
local time appears.
2 Press CLOCK until you hear a beep.
"WORLD"and the hour flashes.
•il I I I r
T i m i i '-' J
3 Press TUNE/SCAN TIME SET + or - to
set the desired hour and press CLOCK.
Press + to advance and - to go back. The time
difference indication changes accordingly.
Two beeps sound to confirm the setting. The
clock starts to operate and flashes.
Notes
• For WORLD time, only the hour can and need
to be set.
• When you change the LOCAL time, the
WORLD time will be adjusted accordingly
based on the time difference setting.
Changing AM
Channel Step
The channel step of this unit is factory-set to
10 kHz. Switch the channel step when using the
unit in areas with the 9 kHz frequency allocation
system.
Area Channel step
North and South
American countries 10 kHz
Other countries 9kHz
Hold down HOFF^ALARM RESET and
BAND for about 5 seconds until you hear
two beeps.
Note
The station presets are erased when the AM
channel step is changed.
Playing a CD
An 8 cm (3-inch) CD can be played without an
adaptor.
1 Press ±OPEN to open the CD
compartment lid and place a disc.
Close the lid
When the button is pressed, the display
shows the total number of tracks and the
running time of the CD.
When a track is playing, the display shows
the track number and the elapsed time of the
track.
3 Adjust the volume using VOLUME.