Sony KV-27XBR55 - Manual (Page 63)

Ibbeoontfnuetf ^
Clearing memorized functions
1
3
Set the CABLEA^IDEO selector to CABLE.
CABLE VIDEO
ÈÛ
Press LEARN.
The LEARN indicator lights up in green.
LEARN
“i
Press VOLUME -.
Keep pressing the VOLUME - button and “0” at once until 6 short beeps
are heard.
WL 000
000
000
Press LEARN.
Now all the memorized functions are cleared.
On teaming Function
• When you clear the memorized functions, the
buttons retain their factory set memory.
• Be sura to confirm that the functions have
been memorized as a tew commanders of
other manutecturers are not compatible with
this Remote Commander.
• Do not use the learning function for other than
video and audio equipment.
• When operating equipment with learned func­
tions, the selectors should be set to the same
position as they were when the functions were
memorized.
• When a new function is assigned to a button,
the previous function is cleared automatically.
• When the memories are full, the LEARN indi­
cator lights steadily if you try to memorize a
new function.
In such a case, set the USE/LEARN selector to
USE to turn the indicator off, then clear the un­
necessary functions.
Caution
When replacing the batteries, do it within
approximately 30 minutes. Otherwise, the
memorized functions may be erased.
LEARN
%
~2,
The teaming function will not work in the following cases:
Problems: Solutions:
There is a fluorescent lamp or equipment
which emits infrared energy.
Move the remote commanders away from
such infrared sources.
The batteries are exhausted. Replace all the batteries with new ones.
There is an obstacle between the Remote
Commanders, or the Remote
Commanders are not positioned head to
head and exactly aligned.
Position the Remote Commanders
properly.
Chapler 4: Advanced Operation 63