Sony KV-27XBR55 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tö be continued
8
Press +/ - until > points to your VCR Input.
(If you connected your VCR to VIDE011N
jacks, make >point to “VIDE01’’.)
DIRECT PLAY
►VIDEO 1: OFF
VIDEO 2: OFF
VIDEO 3: OFF
VIDEO LABEL
loto
To restore the normal picture
Press EXIT.
Press RETURN.
RETURN
DIRECT PLAY
VIDEO 1: OFF
VIDEO 2; OFF
VIDEO 3; OFF
VIDEO LABEL
Use[A ?]&[RETURN]
to select.
10
Press ■(■/ - until the VTR selector mode that you control your VCR at
appears.
(If you control your VCR at VTR 2 In the
Remote Commander, make “VTR 2” appear.)
DIRECT PLAY
VIDEO 1; VTR2
VIDEO 2: OFF
VIDEO 3: OFF
VIDEO LABEL
Use[A 7]&[RETURN]
to select.
11
Press RETURN.
RETURN
%
DIRECT PLAY
►VIDEO 1: VTR2
VIDEO 2: OFF
VIDEO 3: OFF
VIDEO LABEL
If you connect other video equiptrtont, repeat steps 8-11.
Now, direct play setting Is set.
When you are watching a VCR picture, as you press the ► (playback) button,
the input mode changes from TV to VCR.
Example: When you set the VTR1/2/3 MDP selector to VTR2 and press ►, the
input mode changes to the VCR that is connected to the VIDE011N jacks.
Chapter 4: Advanced Operation
151