Setting cable tv on or off, 4 press 4 or to move the cursor, Press menu – Sony KP-53V75 User Manual
Page 24: Press 4 or 4 to select s, and press, Set cable to on or off, Press menu to return to the original screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 Press 4 or to move the cursor
( > )
to the
symbol showing the line you want to
adjust, and press
CONVERGENCE
► ♦RED
♦BLUE
DMENU ill
Use gSBBEiS Ex I I HfNU
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON (the factory setting). If not,
set CABLE to OFF.
You do not have to do this procedure if you perform
AUTO SET UP (page
21).
Do this procedure only when
you want to set it manually.
+RED : Red vertical and horizontal line (left/right/up/
down adjustment)
+BLUE :Blue vertical and horizontal line (left/right/up/
down adjustment)
Press 4, 4, 4, or 4 to move the line until it
converges with the center green line, and
press
CD.
Press MENU.
To move
Press
Up
4
Down
4
Right
4-
Left
-
4
2
Press 4 or 4 to select S, and press
C D .
3
Set CABLE to ON or OFF:
(1) Press
4
or
4
to move the cursor (►) to CABLE,
and press CD.
(2) Press
4
or
4
to select ON or OFF, and press CD.
(UD SETUP
J CHANNEL ERASE/ADO
I CHANNEL CAPTION
CHANNEL BLOCK
[ FAVORITE CHANNEL
>CABLE: OFF
f AUTO PROGRAM
I
VIDEO LABEL
LANGUAGE : ENGLISH
El CONVERGENCE
Ex»ga
4
Press MENU to return to the original screen.
Note
• If CABLE appears in gray, the projection TV is set to a video
input and you cannot select CABLE. Press ANT so that a
channel number appears.
b Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7
Press MENU to return to the original screen.
24'EN I Getting Started