Sony KP-53V75 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Component video terminals Y/C
b
/C
k
provide a
sharper, higher resolution picture by reducing the
amount of signal processing thuSirreating a more
accurate reproduction of the source.
If your DVD player has component video output
connectors, connect them to VIDEO 4 I\ on the
projection TV in the following way.
Connecting a DVD player with component video output connectors
VMC-10HG
(not supplied)
Notes
• Connect your DVD player directly to your TV. Connecting the
DVD player through other video equipment will cause
unwanted picture noise.
• When the DVD player is connected using \TDEO 4 IN, its
MONITOR OUT signals cannot be output.
• Some DVD player connectors may be labeled Y, B-Y, and R-Y.
In this case, connect Y (green) on the projection TV to Y on the
DVD player,
C
b
(blue) to B-Y, and
C
r
(red) to R-Y.
• The jacks of this projection TV are colored in green (Y), blue
(C
b
),
and red
(C
r
).
If line output connectors of your DVD player
have different colors, make connections according to their
labels.
• Because the high quality pictures on a DVD disc contain a lot of
information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page
31).
• If the incorrect colors appear when using this component video
input, recheck the connections they may be reversed.
14-EN
Getting Started