beautypg.com

Sony KP-53V75 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Connecting two VCRs for tape editing using MONITOR OUT

You can record input images displayed on the screen.
This type of connection should be used only when you

connect from the line input of oite^VCR, and from fhe
line output of a second VCR.

Rear of projection TV

Notes

• Do not change the'inp.it Signal while editing through

MONITOR OUT, or the output signal will also change.

• You can use the S video jack to connect a VCR for playback

and the composite video connector to connect a VCR for
recording.

When connecting a single VCR to the projection TV, do not
connect the MONITOR OUT to the \'CR's line input, while at
the same time connecting from the projection TV's VIDEO IN
connectors to the VCR's line output, as shown below.

DO NOT CONNECT IN THIS WAY.

12-

en

Getting Started

This manual is related to the following products: