Searching for a selected point on the tape, To cancel searching, To turn off the bar indication – Sony SLV-788HF User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching for a
selected point on
the tape
You can easily find a selected point by
moving the pointer on the TV screen.
The VCR fast-forwards or rewinds to the
point you indicate and starts playback
automatically.
1
Press DISPLAY repeatedly until the bar
indication appears on the TV screen.
A cursor (■) indicating the current position
of the tape appears on the bar indication. If
the cursor does not appear, play the tape a
few moments (by pushing the joystick to
O PLAY, FF or REW) until the
cursor appears.
2
Push the joystick to
to move the
pointer (-I-) to the point where you want to
start playback.
The VCR starts searching and the cursor
(■) moves toward the pointer. When the
VCR locates the marked point, playback
starts.
To cancel searching
Push the joystick to O PLAY or STOP ■.
To turn off the bar indication
Press DISPLAY again.
DISPLAY
Joystick
O PLAY
►►(S FF
REW
64
Additional Operations