Sony SLV-788HF - Manual (Page 23)

Hookup 5: VCR setup
2
3
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. It both are used, set the
switch to either channel.
For details, see page 76. If
you made A/V connections
(from page 8), you can skip
this step.
Turn on your DSS receiver.
Press EASY SET UP on the VCR.
O
The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press the jovstick (OK). For details, see page
30.
SET UP
LANGUAGE
► ENGLISH
ESPAÑOL
FRANÇAIS
NEXT
CANCEL OK
EASY SET UP
© The CLOCK SET menu appears. Select AUTO
and press the joystick (OK). For details, see page
31.
0 The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 38.
O Enter your DSS ceceivej code number and push
the joystick to 4’- For details, see page 39.
© Set your DSS receiver
output channel (BOX
OUTPUT CH) to LINE
and press the joystick
(OK).
SET UP
CLOCK SET
SELECT
NEXT
CANCEL
OK
EASY SET UP
SET UP
CABLE BOX CONTROL
► CABLE MOUSE
•ON OFF
BOX CODE NO —
BOX OUTPUT CH CH3
SELECT ◄/►
CANCEL : EASY SET UP
SET UP
CABLE BOX CONTROL
CABLE MOUSE
► BOX CODE NO ------------------ --
BOXOUTPUTCH 'CHT
ENTER YOUR CABLE BOX
CODE NO. USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
SET UP
CABLE BOX CONTROL
CABLE MOUSE •ON OFF
BOX CODE NO
► BOX OUTPUT CH LINE'
USE TO SELECT CABLE
BOX CH. THEN PUSH OK
SET UP
SET UP IS DONE
Normal display
Getting Started 23