Note – Sony SLV-788HF User Manual

Page 42

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting up cable box control (continued)

If you cannot get your VCR to control the cable box/DSS receiver

• Check that the Cable Mouse is connected to the CABLE BOX CONTROL

jack on the VCR.

• Check the position of the Cable Mouse.
• Place the cable box/DSS receix’er and VCR a wav from each ofher. Do not

place the cable box/DSS receiver on top of the VCR.

• Try the setup again making sure to use the correct control code. If the

cable box still does not respond, try the other codes that are listed.

If your cable box still does not operate with the Cable Mouse, contact your

cable company to see if they can provide you with a compatible cable box.

Note

• Make sure you turn off the VCR when \'ou plug in or unplug the Cable Mouse. If

you unplug the Cable Mouse and plug it in again, turn on the VCR before you use
the cable box/DSS receiver control feature.

Getting Started