Antenna hookup, Q use this hookup if you're using, Hookup 3 – Sony SLV-788HF User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 3: Hookups (continued)
Hookup 3
Pages 16 to 18
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
Q Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
VHF/UHF
■ @ A Match the type of
connector on your
VHF TV: A, B, or C.
■
B
UHF
VHF
—
UHF
m Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF Match the type of
...................-e A connector on your
TV: A, B, or C.
VCR
VHF
■ ..^ B For connector typei
¿pjp B and C, no UHF
connection is
required.
VHF
—g C
UHF
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable {300-ohm twin lead cable), attach an external
antenna connector (not supplied) so that you can connect the cable to the VHF/UHF
IN connector. If you have separate cables for VHF and UHF antennas, you should ust
a U/V band mixer (not supplied). For details, see page 77.
16 I Getting Started