Canon BJ-200e - Manual (Page 66)

Paper Does Not Eject After Printing
Most software applications tell the printer to eject the paper after
printing, however, some do not. If the printer does not automatically
eject a sheet of paper after printing, follow these steps:
1. Press the ON LINE button to set the printer off-line.
2. Press and hold the LF/FF button for one second to eject the
paper.
3. To resume printing, press the ON LINE button.
Paper Jams Occur
If a paper jam occurs, the ERROR indicator lights and the printer goes
off-line. Follow these steps to clear the paper jam:
1. Press the POWER button to turn off the printer.
2. Gently pull out the sheet of paper with one hand while holding
down the printer body with your other hand.
3. If the paper tears leaving part of the sheet inside the printer, open
the front cover and remove the paper from inside the printer.
4. Press the POWER button to turn on the printer. the POWER,
ON LINE , and HQ (or HS ) indicators light and the print head
moves to the home position. The printer is now ready for printing.
If you are having repeated paper jams, it may be due to the paper you
are using:
T Fan the paper before stacking it in the sheet feeder. This keeps the
sheet of paper from sticking together.
T Check that the paper you are using and your printing environment
are within the specifications of the printer. See Appendix A,
Printer Specifications, for details.
Print Quality Problems
If your print quality is not what you expect it to be, check the following
list for your problem and a possible remedy, or try the suggestions in the
sections below.
NOTE: Use only Commercial number 10 envelopes, which are 9 1/2 x 4
1/8 inches.