Canon BJ-200e - Manual (Page 38)

Demo Print
You can print this sample in both printer control modes: BJ-10 mode or
Epson LQ mode. The demo print describes a few of the printer's features
in different languages.
Starting
To start the demo print, follow these steps:
1. Press the POWER button to turn off the printer.
2. Press and hold the ON LINE button, and press the POWER
button until the beeper sounds twice. The printer starts to print the
demo print.
Stopping
To stop printing the demo print, press and hold the ON LINE button for
one second. The printer stops printing, ejects the current sheet of paper,
and goes back on-line.
The demo print looks like this:
Performing Automatic Line Feeds
You can set the printer so that it performs an automatic line feed each
time it receives a carriage return. Then, when the printer receives a
carriage return code from the computer, it moves to the beginning of the
next line.