Connecting an av receiver – Sony KP-6lHS20 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an AV Receiver
For greater control of all audio and video equipment, connect an AV receiver.
' Chantje “yideo Label" for the VIDEO 1 input fo "Receiver" isee page 64),
Disconnect all power sources before making any connections.
1
Connect the coaxial cable from the incoming cable connection or
antenna to IN on the VCR.
2
Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the
projection TV.
3
Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the
projection TV to MONITOR OUT on the AV receiver.
4
Using an AUDIOATIDEO cable, connect TV OUT on the projection TV
to AUDIOATIDEO 2 IN on the AV receiver.
5
Using an AUDIOATIDEO cable, connect the video equipment to the AV
receiver.
6
Select the Setup menu and set “Video Label” to “Receiver” to fix your
TV’s input to AV receiver (see
“Video Label”
on page 64).
Installing and Connecting the Projection TV
30