Connecting a digital tv receiver – Sony KP-6lHS20 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Connecting the Projection TV
Connecting a Digital TV Receiver
ISI Be sure to read the
Set-top box manual.
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box’s Y,
P
b
and
P
r
jacks to the projection TV.
* The Y. Ps and Pt jacks do not provide audio, so audio cables must
be connected to provide sound.
Component video connection is necessary to viev/ 480p. 720p and
™TO80f formatSTYou may alSSTjse the S VIDEO or Compssile Video
connections, however component video iY Pe, Pe) will provide the
best picture quality for alt format types.
2
Using an audio cable, connect the Digital TV Set-top box’s Audio OUT
jacks to the projection TV’s AUDIO IN jacks.
Rear of
projection TV
RK-74A (not supplied)
You cannot record the signal from any equipment connected into the
This projection TV is not compatible with digital TV receivers
(.nnfioii'i'd vjith RGB or VGA oiitpii! connnctois
28