Sony KP-6lHS20 - Manual (Page 18)

Installing and Connecting the Projection TV
@ Setting the Channel
Fix feature in the Channel
menu (see “Using the
Channel Menu” on page
52) ensures that you do
not accidentally switch
the channels using your
projection TV.
Cable Box Only
Use this hookup if:
You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
You do not intend to hook up any other audio or video equipment to
your projection TV.
When all channels are routed through your cable box, only one unscrambled
channel is sent to the projection TV, so you cannot use the Twin View
feature. If some channels are scrambled, but others are not, consider using
the hookup on page 17 instead.
□
□
1
2
Connect the coaxial connector from your cable service to the cable
box’s IN jack.
Using a coaxial cable, connect the cable box’s OUT jack to the TV’s
VHF/UHFjack.
Cable VHF/UHF
Rear of projection TV
OUT
Cable box
Also, set Cable to ON in the Channel menu, (see page 52)
/i if you will be cnntrollirrj all channel selrctini through your cable box.
conMdei using tlu* Channel Fix feature to s*M ynur oroiection TV fo
channel 3 or 4 (see page 53).
i Youf Sony •'»mote control can be programned !o operate your cable box
{see ■■Programming ttie Remote Control " on page 651.
/■■' To change channels using the cable box. set your pioiection TV 'o
channel 3 or A 'lenenclino on the cable box channfT oistput.
18