Ïïusurround, Safety, Installing – Sony KP-6lHS20 User Manual
Page 3: Attention, Owner’s record
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Safety
□
Operate the projection TV only on 120 V AC.
□
The plug is designed, for safety purposes, to fit into
the wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact your
dealer.
□
If any liquid or solid object should fall inside the
cabinet, unplug the projection TV immediately and
have it checked by qualified service personnel
before operating it further.
□
If you will not be using the projection TV for several
days, disconnect the power by pulling the plug itself.
Never pull on the cord.
For details concerning safety precautions, see
“Important Safeguards” on page 4,
Installing
□
□
□
□
□
To prevent internal heat buildup, do not block the
ventilation openings.
Do not install the projection TV in a hot or humid
place, or in a place subject to excessive dust or
mechanical vibration.
Avoid operating the projection TV at temperature
below 5 °C (41°F).
If the projection TV is transported directly from a
cold to a warm location, or if the room temperature
changes suddenly, the picture may be blurred or
show poor color. In this case, please wait a few hours
to let the moisture evaporate before turning on the
projection TV.
To obtain the best picture, do not expose the screen
to direct illumination or direct sunlight. It is
recommended to use spot lighting directed down
from the ceiling or to cover the windows that face
the screen with opaque drapery. It is desirable to
install the projection TV in a room where the floor
and walls are not of a reflective material.
As an ENERGY STAR®
Partner, Sony Corporation has
determined that this product
meets the ENERGY STAR®
guidelines for energy efficiency.
Note on convergence adjustment
Before you use your projection TV, make sure to adjust
convergence. For details, see “Adjusting the Convergence
Automatically - FLASH FOCUS
tm
on page 33.
ïïuSurround;
with
SRSC#J
TruSurround is a trademark of
SRS Labs, Inc. SRS and the SRS
symbol are registered trademarks
of SRS Labs, Inc. in the United States and selected
foreign countries. SRS and TruSurround are incorporated
under license from SRS Labs, Inc. and is protected under
United States Patent Nos. 4,748,669 and 4, 841, 572 with
numerous additional issued and pending foreign patents.
Purchase of this product does not convey the right to sell
recordings made with the TruSurround technology.
BBE and BBE Symbol are trademarks of BBE Sound,
Inc. and are licensed by BBE Sound, Inc. under U.S.
Patent No. 4,638,258 and 4,482,866.
ATTENTION
Pour prévenir les chocs électriques, ne pas utiliser cette
fiche polarisée avec un prolongateur, une prise de courant
ou une autre sortie de courant, sauf si les lames peuvent
tre insérées à fond sans en laisser aucune partie à
découvert.
Owner’s Record
The model and serial numbers are located at the rear of
the projection TV, below the Sony logo, on the sticker,
and also on the TV box (white label). Record these
numbers in the spaces provided below. Refer to them
whenever you call upon your Sony dealer regarding this
product.
Model No.__________________________
Serial No.__________________________
ENERGY STAR® is a U.S. registered mark.