To change the preset timer settings, To check the preset timer settings, To change the timer – Sony LBT-D270 User Manual
Page 19: To cancel the timer, Connecting optional equipment, To connect a vcr, To connect a turntable (lbt-d270/ lbt-g3100 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4
Press DAILY 1 or DAILY 2.
"ON" and the timer indication appear
and the hour digits flash in the display.
i~i ;< i
w
ri h't
^
.LLLL
► ◄
n / i '
.................. «
'n
v->yv
i
flashing
5
Press ◄ or ► (CURSOR CONTROL) to
set the hour you want the system to turn
on then press ENTER/NEXT.
Set the minutes in the same way, "OFF"
appears and the hour digits flash in the
display.
flashing
6
Press ■ < or ► to set the hour you want
the s\ stem to turn off then press
ENTER/XEXT,
Set the minutes in the same wav.
7
Press or ► to select a sound source.
The display changes as follows:
CD-
- TUNER
8
Press E.NTER/NEXT.
The preset items appear in the display
sequentiallv.
9
Press SYSTEM POWER to turn off the
system.
To change the preset timer settings
Start over from stop 1.
To check the preset timer settings
1
Press DAILY I or DAILY 2 which ever
you have set once.
2
"TIMER OFF" appears in the display.
3
Press DAILY 1 or DAILY 2 again.
The preset items appear in the display
sequentially, then "DAILY 1 ON" or
"DAILY 2 ON" appears in display .
To change the timer
Press DAILY I or DAILY 2.
To cancel the timer
1
Press DAILY I or DAILY 2 which ever
you have set.
2
"TIMER OFF" appears in the display.
Note
When you set the sleep timer, the DAILY
timer does not activate until the system
turns off by the sleep timer.
Connecting Optional
Equipment
For greater enjoyment of your stereo
system, you can connect other components
to the stereo. You can connect:
• a VCR to the VIDEO (AUDIO) IN jacks
• a turntable to the PHONO IN jacks
(LBT-D270/LBT-G3100 only)
• headphones to the PHONES jack on the
front panel
To connect a VCR
1
Connect the VCR or other video
equipment to the VIDEO (AUDIO) IN
jacks.
2
Press FUNCTION repeatedly until
"VIDEO" appears in the display.
The connected sound source comes
through the speakers.
You can also record the VCR sound.
To connect a turntable (LBT-D270/
LBT-G3100 only)
1
Connect the turntable to the PHONO IN
jacks on the rear panel of the stereo.
2
Press FUNCTION until "PHONO"
appears in the display.
rile turntable sound conies through the
speakers.
You can also record the turntable sound.
Chapter 6: Additional Features
I
'j 0