Sony CCD-FX620 - Manual (Page 14)

Playing Back a Tape
To View a Still Picture {Playback Pause)
Press II during playback. To resume playback, press II or >.
To Locate a Scene {Picture Search)
Keep pressing or ►► during playback. To resume normal playback, release the button.
To Monitor the High-speed Picture During Fast-forward or Rewind (Skip Scan)
Keep pressing while rewinding, or while advancing the tape. To resume normal playback, press >
To View the Picture in a Sequence of Stop-motion Images
Press EDITSEARCH repeatedly in playback pause mode It you keep pressing EOlTSEARCH, you can view
the playback picture forward (+) or reverse (-).
To View the Picture at 1 /5 Speed {Slow Playback) {only with the Commander)
Press 1» on the commander during ptayback. To resume normal playback, press >. When slow playback
lasts lor about i minute, it shifts to the normal speed starts automatically.
Notes on playback
• Streaks may appear and the sound may be muted depending on playback mode.
• When still picture mode lasts for about 5 minutes, the camcorder automatically enters stops.
To display the viewfinder screen Indicators on a TV
Press DATA SCREEN on the Remote Commander.
To erase the indicators, press DATA SCREEN again.
Playing Back a Tape wHh Dual Sound Tracks
• Normally set the Hi-Fi SOUND switch to the • position.
• When the tape with dual sound tracks is played back, set the Hi-Fi SOUND switch to the desired sound, 1 or
PwpBrlngthi ftomot» CqmnMiniiif“ Î2SJ;.,
To use the supplied Remote Commander for playback and camera racording. do the following: (1) Insert
supplied two size AA (R6| batteries with correct polarity (2) Set ■ REMOTE COMMANDER on the battery
mounting surface of the camcorder to ON.
Notes on the Remote Commander
• Keep the remote sensor away from strong light such as direct sunlight or illumination. Remote control with
the Remote Commander may not be effective.
• The command mode of the Remote Commartder is VTR2. Avoid using the Sony VCRs wlh the same
20 command mode at the same time.
I Advanced Operation« I
Using Alternative Power Sources
Vou can choose any of the tollowmg power sources for your camcorder: Battery pack (p. 6), house current,
and 12;24 V car battery.
The appropriate power source for you to choose depends on the place where you want to use your
camcorder.
Place Power source Accessory to be used
Outdoors Battery pack
Battery pack NP-55 (supplied). NP-77H/77HD, NP-77.
NP-66H orNP-55H
Indoors House current AC power adaptor AC-V25S (supplied), or AC-S10
In the car 12 V or 24 V car battery DC pack DCP-77
Note on power sources
Disconnecting the power source or detaching the battery pack during recording or playback may damage the
inserted tape. If (his happens, supply the power again immediately.
UsingHouMCurrwit
With the Connecting Adaptor
Use the supplied AC-V25S AC Power Adaptor and connectir>g adaptor.
(1) Attach the connecting plate ol the connecting adaptor to the camcorder (p.22). Attach the AC power
adaptor to the connecting adaptor (p.22). And connect the power code ol the AC power adaptor to a wall
outlet. (2) Set the VTR (DC OUT)/CHARGE selector on the AC power adaptor to VTR (DC OUT).
See next page for further information 27