Editing tapes, Editing from this unit to another vcr – Sony GV-S50 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C
fcJK« »f«W
-------------- -—inrr-T^r~nB irfrliniJKL'
Editing Tapes
Editing from This Unit to Another VCR
Connection
GV-S50
To VIDEO
(yellow)
To AUDIO UR
(white/red)
AudioA/ideo cord VMC-910S/920S*
(not supplied)
To VIDEO IN
(yellow)
To AUDIO IN
(white (L)/red (R))
* If the other VCR is monaural type, use the VMC-910MS or VMC-920MS (not supplied).
Operation
1
Turn on the power of both units.
2
Insert a source tape into this unit (playback) and a tape for recording Into the other VCR
(recording).
3
Select the tape speed (SP/LP) on the other VCR.
4
Activate the EDIT function if it is provided with the other VCR.
5
Locate the playback start point and press PAUSE
II
on this unit.
6 Put the other VCR into recording pause mode
7
Press the pause buttons (PAUSE H on this unit) on both units to release the pause.
8 Press the pause buttons on both units to pause the units again.
9
Repeat steps 7 and 8 to edit more scenes.
10 After editing is completed, press the stop buttons O on this unit) on both units to stop
playback and recording.
34