Sony GV-S50 - Manual (Page 32)

Editing Tapes
Editing from the VCR Equipped with the CONTROL L (LANC tt ) Terminal
Connect the REMOTE terminal on this unit and the CONTROL L terminal on the other unit, and then set
the other unit's LANC mode to “M.”
PlaybacK/pause on the other unit and recording/pause on this unit can be operated simultaneously from
the other unit by pressing only one button.
Connection
To CONTROLLA
To REMOTE (LANC)
VCR
VK-820 (not supplied)
r
iE
To VIDEO
(yellow)
To AUDIO L/R
(white/red)
To VIDEO
OUT
(yellow)
Audio/Video cord VMC-910S/920S*
(not supplied)
To AUDIO
OUT
(whne(L)red(R))
* If the other VCR is monaural type, use the VMC-910MS or VMC-920MS (not supplied).
Operation
1
Turn on the power of both units.
2
Insert a source tape into the other VCR (playback) and a tape for recording into this unit
(recording).
3
Select the tape speed (“SP” or "LP” from “REC MODE") on the menu screen of this unit.
See “Settings on the Menu Screen” on pages 25 and 26.
4
Activate the EDIT function if it is provided with the other VCR.
5
Locate the playback start point and press the pause button on the other VCR.
6 Slide REC in the direction of the arrow and press PAUSE II on this unit.
This unit is now in recording pause mode.
REO*o^ PAUSE
(^1
^
0
V
32