Using the tape counter – Sony GV-S50 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing Back Tapes
Using the Tape Counter
The counter indicates the tape transport in hours, minutes and seconds.
During playback or recording, it shows you the playback or recording time.
1
Press DISPLAY.
The tape counter appears on the screen.
2
Press COUNTER RESET during playback or recording at the point you want to locate later.
The counter is reset to 0:00:00.
COUNTER RESET
Hours Minutes Seconds
Notes
• When you play back a blank tape, the tape counter does not function.
• The counter reading and the point on the tape may not correspond exactly. Use the counter as a guide.
• The difference between the counter reading and the point on the tape may increase by several seconds
in the following cases:
- after repeated fast-forward and rewinding
-when playing back a tape recorded both in SP and LP modes
-when playing back a tape having a blank portion between recorded portions
24