Using a car battery – Sony GV-S50 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using a Car Battery
DCP-77 (not supplied)
1
Attach the DC pack to the video recorder/monitor by aligning the upper side edge of the DC
pack with the white line on the video recorder/monitor and slide the DC pack in the direction
of the ^ mark while pressing it.
2
Plug the power cord into the cigarette lighter socket.
• Only connect the DCP-77 to a car with a negative ground 12 V or 24 V battery.
• The DCP-5S is not recommended for this unit because its power is not enough to operate this unit.
Notes
• Be careful not to let any metal object touch the metal projection on the battery pack. When the battery
pack is not in use, keep it in its case.
• Keep the video recorder/monitor away from any power source. Such sources may cause noise to appear
on the screen.
Cautions on using this unit in a car
• For your safety, do not watch video tapes or operate the controls while driving.
• Avoid leaving the unit in a place with very high temperatures. If you do, it may cause distortion of the
cabinet or malfunction of the unit.
• If you use this unit while the car engine is stopped, the car battery will be discharged. Avoid running
this unit from the car battery more than 12 hours without recharging it.
• Remove the car battery cord from the cigarette lighter socket if you do not use the unit for a long
time.
17