Using the set up @ menu – Sony KV-32V68 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the SET UP @ menu
nSET UP
CHANNEL SETUP
GUIDE PLUS+ SETUP
AUTOGUIDE PLUS+:OFF
CHANNEL BLOCK
FAVORITE CHANNEL
VIDEO LABEL
CAPTION VISION: El 1
LANGUAGE: ENGLISH
TILT CORRECTION: 0
DMENU
Select
CS
Exit ^
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 26.
To select the SET UP @ menu:
Display
Highlight e-
Select
MENU
o
Notes
• Your remote control can be programmed to operate
your cable box. (see page 36)
• When using the GUIDE Plus+ feature with a cable
box, the CHANNEL FIX function will not be
available. Your TV is automatically fixed to the
appropriate channel using the GUIDE Plus+ feature.
• ON/OFF TIMER and CHANNEL BLOCK settings
will be erased when CHANNEL FIX is set.
• If you use the CHANNEL FIX feature, you will not
be able to time to chaimels through the GUIDE
Plus+ Program Guide.
CHANNEL
SETUP
Basic set up
options for
viewing
The functions
within the
CHANNEL SET
UP^menu will not
be available if you
use a cable box
with the GUIDE
Plus+ feature.
GUIDE PLUS+
SETUP
AUTO GUIDE
PLUS+
► CABLE: ON
CHANNEL FIX: OFF
AUTO PROGRAM
CHANNEL SKIP/ADD
DMENU
Move
HE
Select
G0
Exit®
With the CHANNEL SET UP menu open:
channel
set
up
Press ♦ or ♦ to access a feature, then press
CABLE:
Select ON if your TV is connected to a cable
system. After setting CABLE, you will need to run AUTO
PROGRAM
CHANNEL FIX;
Press ♦ or ♦ to set the TV's input to one
of the following options:
2-6: When a cable box is connected to the VHF/UHF
input. Press DBS/CABLE (FUNCTION) and then CH +/- to change
channels through your cable box.
AUX 2-6:
When a cable box is connected to AUX and a cable or antenna is
connected to VHF/UHF. You can alternate between the two inputs by
pressing ANTon the remote control.
VIDEO 1
: When you have connected video equipment (e.g. A/V receiver) and
you want the TV input fixed to it. You will be able to alternate between
video sources using the /W receiver.
OFF:
When you want to turn CHANNEL FIX off.
AUTO PROGRAM:
Instructs the TV to program all receivable channels.
CHANNEL SKIP/ADD:
With the CHANNEL SKIP/ADD
window open:
1
Select the desired channel.
2
Press QD to SKIP or ADD (only one option will be
available).If you SKIP or ADD a channel, the channel's
status within the Program Grid will not change. To
add or delete channels in the grid, you must use the
EDITOR function, (see page 22)
CHANNEL SKiP/ADD
SKIP
FADD
DMENU
Use [0-9] or [CH +/-]
to select the channel
MoveUfil Select(S Exit®
This activates the GUIDE PLUS+ set up screen, (see “SET UP” on page 13)
The GUIDE PLUS SET UP menu cannot be accessed when you are in AUX, or
VIDEO 1/2/3 mode.
ON:
The GUIDE Plus+ feature automatically appears when the TV is turned on
using the remote control.
OFF:
You must press the GUIDE button to access the GUIDE Plus+ feature.
31