Using the guide plus+ buttons, Note, Using your new tv (continued) – Sony KV-32V68 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your New TV (continued)
Using the GUIDE Plus+ Buttons
The GUIDE Plus+ feature offers on-screen
program information. Use the chart and
illustration on this page to learn how to access
and use the GUIDE Plus-t feature with your
remote control.
REFER TO THE ILLUSTRATION
OFTHEREMOTECONTROL ON
THE INSIDE FRONTCOVER OF
THIS MANUAL AS YOU
REVIEWTHISCHART
Note
• You must connect your IR Blaster in order to
operate your VCR and/or cable box. This will
allow the GUIDE Plus-i- feature to tune to and
record programs.
16
:
Use the Purple Labeled Buttons for the GUIDE Plus+ Feature Operations
VCR+
CZ)
Pressing the VCR+ button allows you to program your VCR to record TV programs
using the VCR Plus+ code system. You can find the PlusCode programming number
codes in your newspaper’s Program Guide.
You must have a VCR and an IR Blaster properly connected and set up in order to
record programs using the VCR Plus-r feature. Press VCR+ again to exit the VCR
Plus-t- screen.
Once a program has been scheduled for recording using the VCR Plus+ system, you
can review your selection, change the frequency of recording, or cancel the recording
within the GUIDE Plus-t- SCHEDULE screen, (see “SCHEDULE” on page 21)
cm
Pressing the ( a I button while using the GUIDE Plus-t- feature will lock/unlock the
video window, so the picture will remain the same as you move through the Program
Grid.
JUMP
(§)
JUMP
Press the (g button to choose the left (blue) action button (as displayed at the top of
the Program Grid).
ENTER
ENTEB
Press the (g) button to choose the right (green) action button (as displayed at the top
of the Program Grid).
INFO
o
Pressing the INFO button will show additional information about a selected program
or future programming on the selected channel, if available. An info icon lU will
appear on the screen to indicate when information is available.
You must press the INFO button again to return to basic information.
GUIDE
o
Pressing the GUIDE button will activate the GUIDE Plus-t screen.
Pressing again will exit the GUIDE Plus-t screen.