Caption vision, Cc1,2, 3or4, Text1,2, 3or4 – Sony KV-32V68 User Manual
Page 28: Xds (extended data service), Note, Using your new tv (continued), Using the white labeied buttons for tv operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your New TV (continued)
Using the White Labeied Buttons for TV Operations
ENTER
Use to activate a channel selected with the 0-9 buttons.
Use to activate on-screen options while using the GUIDE Plus+ feature.
MTS
CZ)
Pressing the MTS button will cycle through the MTS options (STEREO, SAP,
MONO), (see the MTS section in “Using the AUDIO J menu” on page 29)
DISPLAY
CD
Press repeatedly to cycle through the available displays;
Status
Channel number, current time, channel caption (if set) are displayed.
CAPTION VISION
Closed captioning will be displayed if the broadcaster offers this service,
(see right)
To cancel the display, press DISPLAY until DISPLAY OFF appears.
TVAfIDEO
CD
Press repeatedly to cycle through available video inputs:
TV, VIDEO 1, VIDEO 2 and VIDEO 3
When you are in a video mode (VIDEO 1, 2, or 3), you will not be able to access the
GUIDE Plus-h feature.
ANT
CD
(AUX input)
Press to change the VHF/UHF input to the AUX input.
Press to change from VIDEO input to TV input.
For detailed connection information, see “Cable and antenna” or "Cable box and
cable" on pages 5-6.
The GUIDE Plus+ feature cannot be accessed in AUX mode.
TV/VTR
Press when you are finished using a VCR and you want to switch to the TV input
when your remote control is in VCR mode. Your VCR power will remain on.
SYSTEM
OFF
o
The SYSTEM OFF button allows you to power off all Sony equipment at once.
CAPTION VISION
(Closed Caption)
SETUP
CHANNEL SET UP
GUIDE PLUS+ SET UP
AUTO GUIDE PLUS+:OFF
CHANNEL BLOCK
FAVORITE CHANNEL
VIDEO LABEL
►CAPTION VISION: E3 1
, LANGUAGE: ENGLISH
TILT CORRECTION: 0
I
L3MENU
Move05] Select® Exit®
CAPTION VISION can be used for programs
that are broadcast with closed captioning.
CC1,2, 3 o r 4
Shows you a printed version of the dialog or
sound effects of a program. (The mode should
be set to CC1 for most programs)
TEXT1,2, 3 o r 4
Shows you network/station information
presented using either half or the whole screen.
XDS (Extended Data Service)
Shows a network name, program name,
program length, and time of the show if the
broadcaster offers this service.
Note
• Poor reception of TV programs can cause
errors in CAPTION VISION and XDS.
Captions may appear with a white box or
other errors instead of intended text.
24