Watching the tv – Sony KV-32V68 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Watching the TV
The following chart will explain the function
of the buttons found on your remote control.
REFERTOTHEILLUSTRATION
OFTHE REMOTE CONTROL ON
THE INSIDE FRONTCOVER OF
THIS MANUAL AS YOU
REVIEWTHISCHART
V ........... - Using the White Labeled Buttons for TV t
)perations
VTR' DB& POWER
'OVD CABLE
CD CD
Press when you want to turn conne^d equipment on and off.
You can program your remote control to operate other video equipment, (see
“Operating Video Equipment" on page 34)
---------FUNCTIC>N-------
VTB/ DBS'
OVD CABLE TV
CD CD CD
Press when you want to control connected equipment with your remote
controi. (see pages 34-36 for instructions on programming your remote controi)
(D-(D
and ENTER
Use for direct channel selection. Press 0-9 to select a channel, the channel will
change after 2 seconds, or you can press ENTER for immediate selection.
CH
©1*
Press to scan through the channels.
Keeping the CH
+
or-pressed allows you to rapidly scan to the desired channel.
JUMP
(
5
)
Press to alternate or
jump
back and forth between two channels. You can jump
between the last two channels selected with the 0-9 keys.
This button can also be used to activate on-screen options while using the
GUIDE Pius-h feature.
MUTING
O
Press to mute the sound (MUTING will appear on the screen). Press again or
press VOL
+
to restore sound.
SLEEP
cz>
Press repeatedly until the TV displays the approximate time in minutes (30, 60, or
90) that you want the TV to remain on before turning off automatically. Cancel by
pressing until SLEEP OFF appears.
2 3