Sony SPP-SS965 - Manual (Page 37)

storing a number of the Caller ID list into
the Phone Directory
1
2
Display the name and phone number you want
to store from the Caller ID list (see page 33).
Confirm the number and press Jog Dial.
SMITH JOHN
I-201-123-4567
*"'GS l.ow™ r-53
ERPSE
'-'251-123-4567
Turn Jog Dial up to make "PGM" flash and SMITH Jl
press Jog Dial. 1201123455
The cursor flashes at the end of the name. ______
Enter or change the name, if necessary (see
page 24).
Press Jog Dial.
The cursor flashes at the end of the phone
number.
Enter or change the phone number, if necessary
(see page 24).
SMITH JOHNw,
12011234510:
J Press Jog Dial again.
You’ll hear a long confirmation beep and the name and
number are stored.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 38.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
n
SL
9
9
01
VI
continued
Caller ID Features 37‘