Sony SPP-SS965 - Manual (Page 17)

Receiving calls
1
When you hear the phone ring:
• Press
( TALK/ CALL WAITING/ FLASH~).
or
• Pick up the handset from the base
phone when the handset is placed
on the base phone.
"TALK" appears on the display and
the display also shows the operation
duration in hours, minutes and
seconds.
"HANDSET IN USE" appears on the
display of the base phone and the
LINE lamp on the base phone lights
up.
During a conversation, you can adjust
the handset volume. Follow the
procedure described in the following
table.
When you're done talking, press
COFF) or place the handset on the base
phone.
00
fil
VI
A
I/)
Additional tasks
The display and the LINE lamp on the
base phone go off.
To Do this
Adjust the handset volume During phone conversations, press ( VOUPGMT .
Each press of ( VOLypGM ) switches the speaker volume bv one of
four levels.
Put a call on hold Press C HOLD). "HOLD" appears on the display.
Press ( HOLD) aeain to resume the conversation.
Switch to another call Press ( TALK/ CALL WAITING/ FLASH).
("call waiting" service*) Press ( TALK/ CALL WAITING/ FLASH) again to return to the tirst
caller.
• You need to subscribe to this service from your telephone company.
Note
If another call comes in by "call waiting" service while conversing with an
outside caller, you will hear two short beeps.
Tip
To inform you of an incomingcall, thendisplay shows RINGING when ringing. ■-
If you have subscribed to the Caller ID service;
• the caller's,number and/or name appears on the display when you receive a
call (see page 32) ot when another call comes in by "call waiting" service.
• the ringer sound changes to a higher tone if the call matches the number
stored on ONE-TOUCH DIAL buttons, speed dialing keys or in the Phone
Directory (memory match function; see page 32).
continued
Basics 1 7
'"