Step 2: setting up the base unit (continued), Notes, Choose the dialing mode – Sony SPP-S9101 User Manual

Page 10: If you aren't sure of your dialing system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 2: Setting up the base unit (continued)

Notes

• Use only the supplied AC-T123 AC power adaptor.

Do not use any other AC power adaptor.

• Connect the AC power adaptor to a continuous power

supply.

• Place the base unit close to the AC outlet so that you

can unplug the AC power adaptor easily.

Polarity of the plug

«>-

Tip

If your telephone outlet is not modular, contact your
telephone service company for assistance.

Modular

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).

DIAL MODE switch

Depending on your dialing system, set the DIAL MODE switch as
follows:

If your dialing system is

Set the switch to

Tone

Pulse

If you aren't sure of your dialing system

Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.

10“

Getting Started