Sony SPP-A940 - Manual (Page 35)

Troubleshooting
If you've experienced any of the following difficulfies while using your
phone, use this troubleshooting list to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.
Symptom Remedy
You hear four short error • Make sure you set up the base unit correctly (page 9).
beeps when you press • Move the handset closer to the base unit.
(TALK). • Replace the handset to the base unit for a while to
reset the random security code.
You hear no dial tone. • Make sure the telephone line cord is securely
n connected to the telephone outlet.
u
O) • Make sure the battery is fully charged (page 12).
The telephone always • Make sure fhe number you last dialed (including the
(0
connects with the wrong tone and pause digits, if used)
number or doesn't connect at is 16 digits or less.
all, even though the number • Make sure the dialing mode is set correctly
you dial is correct. (page 10).
• Before dialing, make sure you can hear a dial
tone.
The phone doesn't redial • Make sure the last dialed number is really the one
correctly. you want to dial.
• If the number last dialed exceeds 16 digits, only the
first 16 digits are dialed.
«/1 The handset doesn't ring. • The battery may be weak. Charge the battery for more
*55
fhan 10 hours (page 12).
• Make sure you sef up the base unit correctly (page 9).
c
• Move the handset closer to the base unit.
>
• Replace the handset to the base unit for a while to s
0) reset the random security code.
cc
• Make sure the ringer is turned on (page 19).
You hear interference during • Move the handset closer to the base unit.
c
о conversation. • Rress
(
CHANNEL) tor a channel that gives better
n
reception.
V)
о
>
• Place the base unit away from noise sources (page 8).
c
о You hear a beep during • The battery is weak. Charge the battery for
u
conversation and the
ВАТТ -
more than 10 hours (page 12).
3
о
LOW lamp flashes.
>
a.
fi.
S'
o'
3
Ш
3
о
3
ai
r*
o'
3
continued
Additional Information 35
"