Checking the ringer type, Setting the base ringer, Paging – Sony SPP-A940 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the ringer type (continued)
Checking the ringer type
1
Press (PGM).
2
Press
3
Press
The currently selected ringer sounds.
4
Press (OFF).
Note
If you hear no sound (only key beep), the ringer on the handset has been turned off.
Setting the base ringer
2
3
Press (MENU) until you hear
"Set base ringer."
blinks on the display.
// // 1
Press (SELECT) to turn the
ringer on or off.
Press (TIME/SET).
The base ringer setting is
announced.
^ Press (PLAY/STOP)to exit the
menu set up mode.
Note
The base ringer is preset to on.
20^
Paging
You can page from the base unit to the handset.
Telephone Features
Press (PAGE).
The base unit rings the handset four
times before automatically ending
the page. To end the page at the base
unit, press (PAGE).
Note
If a call comes in during paging, paging is
canceled.
Tip
To end a page at the handset, press (OFF).