Sony SPP-Q200 - Manual (Page 25)

Troubleshooting
Problem Cause/Solution
Making a call
You hear five short error
beeps when pressing TALK. • Make sure the base unit is connected to an AC outlet.
• Hxtencf the antenna of the base unit vertically.
• Move the cordless handset closer to the base unit.
• Place the base unit away from noise sources (page 10).
You Hear no dial tone. • Make sure the telephone line cord is securely connected to the
telephone outlet.
• The battery may be weak or completely discharged.
Charge the battery for more than 10 hours (page 13).
The telephone always
connects with the wrong
number, or does not connect
at all, even though the
numbers you dial are correct. • Make sure the dial mode setting is correct (page 16).
The phone does not redial
correctly. • Make sure the number you last dialed (including the tone and
pause digits, if used) is fewer than 32 digits.
• Make sure the last dialed number is really the one you want to dial.
Talking on the cordless handset
You hear interference during ,
conversation. *. Move the cordless handset closer to the base unit.
• Press CHANNEL on the cordless handset for a channel that gives
better reception.
• Place the base unit away from noise sources (page 10).
You hear a beep every second
during conversation. • It is an out-of-range alarm. Move the cordless handset closer to the
base unit within 15 seconds (page 18).
You hear a beep every three
seconds.
• The battery is weak. Charge the battery for more than 10 hours
(page 13).
Receiving calls
The cordless handset does
not ring. • Move the RING ON/BATT SAVE .switch to RING ON.
• The battery mav be weak. Charge the battery for more than 10
hours (page 13).
• Extend the antenna of the base unit vertically.
• Move the cordless handset closer to the base unit.
• Place the base unit away from noise sources (page 10).
• If you are storing a memory dialing number, you cannot receive
any calls. This is not a problem.
(to be continued)
General 125