Sony SPP-Q200 - Manual (Page 21)

Memory dialing
You can store the numbers you
frequently call into the memory
so that you can dial a number
with the touch of one (one-
touch dialing) or two (speed
dialing) buttons.
SPEED DIAL
button
Storing memory dialing numbers
While storing a number, you
cannot receive calls.
1
Press PGM.
The TALK lamp flashes.
For one-touch dialing:
Press one of the three ONE-TOUCH DIAL buttons (A-C).
You hear a confirmation beep.
For speed dialing:
1 Press SPEED DIAL.
2 Press a dialing key between 1 and 7.
You hear a confirmation beep.
\
Do not enter a memory dialing
number that exceeds 16 digits
(the tone and pause digits are
each counted as one digit);
otherwise, you will hear five
short error beeps and you must
start over again.
Dial the phone number you wish to store.
If you enter a wrong number, press PGM and start again
from step 1.
Press PGM.
You hear a confirmation beep, and the TALK lamp goes
out.
Note on storing numbers-----------------------------
Do not let more than 20 seconds elapse between any two steps of
the storing procedure.
To change a stored number--------------------------
Program a new number using the procedure above. The old
number will be erased automatically.
Memory dialing 21