Hanging the base unit on a wall – Sony SPP-Q200 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Placing the phone units

Hanging the base unit on a wall

■

To mount the wall bracket
directly on the wall, use the
supplied screws.

If your telephone outlet is not
modular, contact your telephone

service company for assistance.

Modular

Press the AC power adaptor cord and the short

telephone line cord into the wall bracket.

Hook the wall bracket to the wall plate and plug

the telephone line cord into the telephone
outlet.

Insert the tabs on the top of the wall bracket
into the base unit and press the phone so that

the lower tabs on the wall bracket go into the

base unit.

Then extend the antenna fully.

Connect the AC power adaptor and the

telephone line cord.

For details, see the "Connecting the base unit" section
(page 11).

Setting up