Using the remote commander, Remote control direction, Notes on the remote commander – Sony CCD-TR23 User Manual
Page 44: Identirying the parts
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identirying the Parts
Using the Remote Commander
Make sure that the COMMANDER mode is set to ON in the menu system (p. 25),
O
menu
O
o ♦
f©
( 1
Q EXECUTE
GD
MENU
COMMANDER
EE
OFF
(MENU]: END
Remote Control Direction
Aim the Remote Commander to the remote sensor within the range as shown below.
Notes on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or illumination.
Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor and the Remote Commander.
• This camcorder works at commander mode VTR 2. The commander modes (1, 2, and 3) are used to
distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use
another Sony VCR at commander mode VTR 2, we recommend you change the commander mode or
cover the remote sensor of the VCR with black paper.
44