Remote commander, T] transmitter (p. 17, 44), 2] tape transport buttons (p. 17,18) – Sony CCD-TR23 User Manual

Page 43: 3] display button (p. 18), 4] size aa (r6) battery holder, 5] start/stop button, 6] power zoom button, Preparing the remote commander, Note on battery life, To avoid damage from possible battery leakage

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote Commander

The buttons that have the same name on the Remote Commander and on the camcorder function
identically.

[T] Transmitter (p. 17, 44)

Point toward the remote sensor to control the
camcorder after turning on the POWER switch
on the camcorder.

[2] Tape transport buttons (p. 17,18)

[3] DISPLAY button (p. 18)

[4] Size AA (R6) battery holder

[5] START/STOP button

[6] Power zoom button

The zooming speed is unchangeable on the
Remote Commander.

Preparing the Remote Commander

To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA

(R6) batteries.

(1)

Remove the battery cover from the Remote Commander.

(2)

Insert both of the size AA (R6) batteries

with correct polarity.

(3)

Put the battery cover back onto the Remote Commander.

;'.'v

Note on battery life

The batteries for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or daed, the Remote Commander does not work.

To avoid damage from possible battery leakage

Remove the batteries when you will not use the Remote Commander for a long time.