Editing onto another tape, Before editing, Starting editing – Sony CCD-TR23 User Manual

Page 26: To edit more scenes, To stop editing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Editing onto Another Tape

You can create your own video program by editing with any other W 8 mm, HiH Hi8, ;VHS VHS, SMS S-

VHS, MSI»i VHSC, SIVHsra S-VHSC, or rfl Betamax VCR that has video/audio inputs.

Before Editing

After connecting the camcorder to the VCR,

(1)

Slide the POWER switch to PLAYER.

(2)

Set EDIT mode to ON in the menu system to minimise the

picture deterioration (p. 25).

Starting Editing

(

)

Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your

recorded tape into the camcorder.

(2)

Play back the recorded tape on the camcorder until you locate the

point where you want to start editing. Then set the camcorder to playback pause mode.

(3)

Set the

recording VCR to recording pause mode.

(4)

Press

on the camcorder and VCR simultaneously to start

editing.

To Edit More Scenes

Repeat steps 2 to 4.

To Stop Editing

Press ■ STOP on the camcorder and VCR. When you finish editing, reset EDIT mode to OFF (p. 25).

Use of the EDITSEARCH button

To play back a tape in the forward or reverse direction keep pressing EDITSEARCH during playback
pause. You can play back still pictures successively at specific intervals by pressing EDITSEARCH

intermittently.

Note on DISPLAY function

If you have displayed the viewfinder screen indicators on the TV (DISPLAY function), erase the
indicators by pressing DISPLAY on the Remote Commander so that they will not be superimposed on
the edited tape.