Setting up the remote commander, Inserting the batteries, Using the remote commander – Sony SLV-677HF User Manual
Page 5: 0 ofi, Continued, Step 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and - on the
batteries to the diagram inside the
battery compartment.
Insert the negative (-) end first, then
push in and down until the positive
(+) end clicks into position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with
a dot (•) can be used to operate
your Sony TV.
Remote sensor
^
_______
,..s^
^ 1
omloViyO
0
Ofi-
CDCDCZ)
CD CD
‘O '© '©
/VIDEO
To operate
Set ITVI/IVIDEO
1
to
the VCR
1 VIDEO 1 and point at the remote sensor on the VCR
a Sony TV
I
tv
I and point at the remote sensor on the TV
Notes
• With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove
.the batteries to avoid possible damage from battery leakage.
Do not use a new battery with an old one.
Do not use different types of batteries.
continued
Getting Started